←Ethernet Switch
RES-210
| manufacturer | Abaco Systems |
| port count | 10 |
| port speed | 10/100/1000 |
| weight (lbs) | 4.409 |
| operating temperature (°C) | -40°C to +71°C |
| input voltage (V) | 20V to 33V DC |
| connector type | RJ45 |
| form factor | Non Standard (Enclosed) |
| management | Managed L2/L3 |
| production status | End of Life |
| country of origin | USA |
Detailed Specifications
| detailed description | The Abaco Systems RES-210 is a standalone, fully managed Layer 2/3+ rugged Gigabit Ethernet switch designed to withstand extreme temperatures and harsh environments. Weighing under 4.5 lbs and occupying less space than an average shoebox, it is a popular choice for network architects designing for constrained environments such as small UAVs and similar SWaP-limited platforms. The RES-210 is fanless, conduction-cooled, and conformal coated, delivering 10 ports of 10/100/1000BaseTX with full IPv4/IPv6 Layer 2 and Layer 3 switching and routing. It is powered by a MIL-STD-704E (aircraft) or MIL-STD-1275B (ground vehicle) compliant power supply and is managed via Abaco's proprietary OpenWare switch management software. NOTE: The RES-210 entered Restricted Production Phase (RPP) on December 31, 2017. It is effectively end-of-life. Abaco recommends the RES3000 family as the current replacement. Documentation and support remain available through Abaco Systems. Manufacturer: Abaco Systems (a business unit of AMETEK, Inc.) 12090 Memorial Parkway SW Huntsville, Alabama 35803 Americas: 1-866-652-2226 EMEA/APAC: +44 (0)1327 359444 www.abaco.com PORT CONFIGURATION ------------------ Total Ports: 10 Port Type: 10 x 10/100/1000BASE-T (10/100/1000BaseTX) Performance: Full wire-speed switching on all ports PoE: Not supported PHYSICAL SPECIFICATIONS ----------------------- Form Factor: 3U standalone chassis Weight: < 4.5 lbs (< 2.04 kg) Volume: Less than an average shoebox (exact dimensions in locked datasheet; contact Abaco for full mechanical drawings) Cooling: Fanless; conduction-cooled (no moving parts; no active airflow required) Conformal Coating: Yes (humidity and contamination protection) POWER ----- Power Supply: MIL-STD-704E (aircraft 28V DC bus) OR MIL-STD-1275B (ground vehicle 28V DC bus) (one or the other depending on configuration) Optional Hold-Up: Not specified for RES-210 (available on RES-110 sibling; contact Abaco for RES-210 hold-up capability) ENVIRONMENTAL SPECIFICATIONS ----------------------------- Operating Temperature: Extended temperature range Cooling Method: Conduction cooling Conformal Coating: Yes Intended Platforms: Small UAVs, SWaP-constrained airborne, and ground vehicle applications SWITCH MANAGEMENT SOFTWARE -------------------------- Software: Abaco OpenWare (proprietary) (current version: OpenWare 6.8 per available documentation) Management Access: In-band: Telnet, HTTP, SNMP (over Ethernet) Out-of-band: RS-232 serial console (CLI) IPv6 Support: Full IPv6 switching and routing Features: Configuration management Monitoring and diagnostics Switching control Addressing and routing Customizable to meet customer requirements LAYER 2 SWITCHING FEATURES --------------------------- - Fully managed Layer 2/3+ switch - Full wire-speed IPv4 and IPv6 switching - IEEE 802.1Q VLANs - QoS / traffic prioritization - Spanning Tree Protocol (STP / RSTP) - Link aggregation / EtherChannel - SNMP management - Port mirroring / SPAN - In-band Ethernet management (Telnet, HTTP, SNMP) - Out-of-band RS-232 console (CLI) LAYER 3 ROUTING FEATURES ------------------------- - IPv4 static and dynamic routing - IPv6 routing (full wire-speed) - Full Layer 3 management via OpenWare software MIL-STANDARD COMPLIANCE ------------------------ MIL-STD-704E Aircraft Electric Power (28V DC) MIL-STD-1275B Ground Vehicle DC Power (28V) SUPPORT & DOCUMENTATION ------------------------ Available documents (login required on Abaco portal): - RES-210 Datasheet - RES-210 Reference Manual - OpenWare V5.2.5 Operator's Reference Manual - OpenWare 6.8 Software Reference Manual Networking Resource Center: Abaco provides dedicated engineering support for design and long-term maintenance of RES-210 based networks. Contact Abaco directly for migration assistance to the RES3000 platform. TYPICAL USE CASES ----------------- - Small unmanned aerial vehicles (UAVs) - SWaP-constrained airborne platforms - Military ground vehicles (vetronics) - Naval and shipborne applications (case study: warship fire control system upgrade) - Space applications (case study: upgrading a network in space) - C4ISR embedded network edge PRODUCT STATUS -------------- Status: Restricted Production Phase (RPP) since December 31, 2017 (effectively end-of-life) Replacement: Abaco RES3000 family (RES3120: 12-port, RES3240: 24-port, RES3244: 24-port + 4x10GbE) RES3120: 148mm W x 86mm H x 131mm D, 2 kg |